Electrostatic Dissipative (ESD) Flooring Contractors in New Jersey & the Tri-State
Installed by High Performance Systems (HPS Floors)—certified industrial flooring contractors since 1988—specialized Electrostatic Dissipative (ESD) and conductive resinous flooring systems protect sensitive electronics, manufacturing equipment, and personnel from electrostatic discharge. By integrating copper grounding grids with high-performance epoxy and urethane topcoats, HPS delivers controlled static-dissipative surfaces tailored for electronics manufacturing, aerospace facilities, data centers, and cleanrooms across the region.
Explore our core capabilities on our main Services page or read expert technical insights on our Flooring Insights page.
Why ESD Flooring is Critical for Industrial Facilities
Uncontrolled static electricity can instantly damage microchips, disrupt sensitive assembly equipment, and create severe safety hazards in environments handling volatile materials.
Prevents Component Damage (Electrostatic Discharge): Safely bleeds off static charges generated by personnel and equipment before they can discharge into sensitive electronics.
Meets Strict Industry Standards: Formulated to comply with ANSI/ESD S20.20 standards for electrical resistance and static control.
Maintains Permanent Conductivity: Unlike temporary static-control mats or topical waxes, our resinous ESD systems retain their electrical properties throughout the life of the floor.
Explore similar high-performance environments on our Commercial and Industrial, and Pharmaceutical service pages.
Our Precision ESD Installation & Grounding Process
Installing a certified static-dissipative floor requires rigorous subfloor preparation, proper copper grounding, and precise electrical resistance testing:
Subfloor Evaluation & Moisture Testing: Assessing the concrete slab to ensure it meets moisture thresholds for resinous adhesion.
Mechanical Surface Preparation: Utilizing industrial planetary grinders to achieve the manufacturer-specified Concrete Surface Profile (CSP) and remove surface contaminants.
Copper Ground Grid Network Installation: Laying and testing a conductive copper grid network tied directly to building structural steel or certified earth grounds.
Conductive Primer & Intermediate Coats: Applying specialized conductive epoxy primers and self-leveling wear coats that evenly dissipate static charges across the entire surface.
Dissipative Urethane Topcoat & Certification Testing: Finishing with a high-durability chemical-resistant topcoat, followed by rigorous ohm meter testing to certify electrical compliance.
Frequently Asked Questions About ESD Flooring
What is the difference between conductive and static-dissipative flooring?
Conductive floors have a lower electrical resistance range (typically 2.5 x 10^4 to 1.0 x 10^6 ohms), allowing static electricity to discharge very rapidly. Static-dissipative floors have a higher resistance range (1.0 x 10^6 to 1.0 x 10^9 ohms), releasing static charges at a slower, more controlled rate.
How is the floor grounded during installation?
High Performance Systems installs a grid of copper foil strips adhered to the subfloor beneath the resinous layers, which is then wired to building earth grounds by licensed electricians or certified technicians.
How can I request a facility consultation or estimate?
You can contact our team directly through our Contact Us page or learn more about our company history on our About Us page.
